Hi Guys,
At my age I find it difficult to keep up with all the new technology. Really I'm a bit of a luddite and need some advice from you young switched on guys.
I have a basic Spectrum DX6i and wish to use the dualaile mix. After enable it and with aile servo port for right aileron and the aux1 servo port for left aileron. This should give me 1 up and 1 down ailerons but both ailerons go either up or down together. I have changed leads and changed the receiver but still it doesn't solve the problem.
I have successfully used the dualaile on several previous models so I would welcome any suggestions before I go and buy a Y lead!!
Gerry
ADVICE
Re: ADVICE
Hi Gerry
You need to reverse which ever servo is going the wrong way ie if the right aileron goes up when you move the stick to the right then it's the left or aux channel that needs reversing it will be in the setup menu hope this helps
John
You need to reverse which ever servo is going the wrong way ie if the right aileron goes up when you move the stick to the right then it's the left or aux channel that needs reversing it will be in the setup menu hope this helps
John
0 x
The Devils in the detail
-
panicplane
- Posts: 44
- Joined: Wed Nov 13, 2013 11:25 am