Depron Vulcan

[Hotrod]

I've been contemplating building a Vulcan for quite a while having trolled the net to find a kit ,plan or treads with few results finally I found a couple of good threads on RC groups .lot of reading gathering pictures and head scratching and I've made a start using a 3view
Plan on the interwebs 60 inch wingspan pusher prop

[Hotrod]

This will allow the nose to come off to get to the battery compartments

This will allow the nose to come off to get to the battery compartments

This bits a bit fiddly but hopfully should work

This bits a bit fiddly but hopfully should work

More formers,more cutting & glue

More formers,more cutting & glue

First ones in place and glued with foam safe contact glue

First ones in place and glued with foam safe contact glue

Firstly cut out the formers

Firstly cut out the formers

[dancing alan]

Looking good

[richwilliams]

Looking good. Hope it sounds like a Vulcan

[Ian]

Nice work, looks to be coming along quickly. Look forward to a Lightning / Vulcan formation flight!

Any thoughts about colour scheme yet? 1960s anti-flash white always looks nice.

[Hotrod]

Hole cut and cockpit painted

Hole cut and cockpit painted

Screen in place ready to paint

Screen in place ready to paint

[Hotrod]

Cut out the majority of the parts of the plan templates

Cut out the majority of the parts of the plan templates

Start on the fuzz

Start on the fuzz

Main bones of the fuzz in place

Main bones of the fuzz in place

Thanks gents it's coming on quickly with the lack of flying weather I must admit I'm enjoying the build and I do like working with this depron

[Hotrod]

Bit more done

Front section fitted an intake boxes done

Front section fitted an intake boxes done

Quick mock up to see if it look right

Quick mock up to see if it look right

Top skin on so on to the tail used balsa to add some stiffness

Top skin on so on to the tail used balsa to add some stiffness

9 gram servo in place for the rudder and skin on one side

9 gram servo in place for the rudder and skin on one side

Bit more done to night will post tomorrow

[dancing alan]

Its looking good buddy...

[ivan-pik]

Really impressive! Is it crash-proof? :oD