Talk about anything else here.
-
Hotrod
- Posts: 110
- Joined: Tue Nov 12, 2013 9:24 pm
Post
by Hotrod »
0 x
The Devils in the detail
-
Hotrod
- Posts: 110
- Joined: Tue Nov 12, 2013 9:24 pm
Post
by Hotrod »
![image.jpeg (250.56 KiB) Viewed 7825 times image.jpeg](./download/file.php?id=321&t=1&sid=7e9f83246216e6b08928ac3558efc885)
Motor mount ply & balsa with carbon rods
- Motor mount ply & balsa with carbon rods
![image.jpeg (251.46 KiB) Viewed 7825 times image.jpeg](./download/file.php?id=322&t=1&sid=7e9f83246216e6b08928ac3558efc885)
Glued in with gator glue
- Glued in with gator glue
![image.jpeg (249.35 KiB) Viewed 7825 times image.jpeg](./download/file.php?id=324&t=1&sid=7e9f83246216e6b08928ac3558efc885)
Carbon rods spread the load
- Carbon rods spread the load
![image.jpeg (253 KiB) Viewed 7825 times image.jpeg](./download/file.php?id=325&t=1&sid=7e9f83246216e6b08928ac3558efc885)
3536 outrunner 1500 kv 400watts on 7x6 prop
- 3536 outrunner 1500 kv 400watts on 7x6 prop
0 x
The Devils in the detail
-
Hotrod
- Posts: 110
- Joined: Tue Nov 12, 2013 9:24 pm
Post
by Hotrod »
As it been another week of no flying a bit of time on the Vulcan
![image.jpeg (255.5 KiB) Viewed 7771 times image.jpeg](./download/file.php?id=336&t=1&sid=7e9f83246216e6b08928ac3558efc885)
Top decks are all close in a so are some of the underside as well tail and rudder wiring
- Top decks are all close in a so are some of the underside as well tail and rudder wiring
![image.jpeg (247.89 KiB) Viewed 7771 times image.jpeg](./download/file.php?id=337&t=1&sid=7e9f83246216e6b08928ac3558efc885)
Right for the underside engine tubes
- Right for the underside engine tubes
![image.jpeg (248.63 KiB) Viewed 7771 times image.jpeg](./download/file.php?id=338&t=1&sid=7e9f83246216e6b08928ac3558efc885)
Base plate and a couple of formers and skin
- Base plate and a couple of formers and skin
-
Attachments
-
![image.jpeg (249.92 KiB) Viewed 7771 times image.jpeg](./download/file.php?id=340&t=1&sid=7e9f83246216e6b08928ac3558efc885)
Looking good the tail pipes are a bit of tin foil over plastic shot classes only 3 more to make
- Looking good the tail pipes are a bit of tin foil over plastic shot classes only 3 more to make
0 x
The Devils in the detail
-
richwilliams
- Posts: 200
- Joined: Tue Nov 12, 2013 9:24 pm
Post
by richwilliams »
Looking good john. Can't wait to see it.
But I reckon you could build a real one by the time this weather clears. It's relentless.
0 x